What type of material is 13-8?

2020-12-14 by No Comments

What type of material is 13-8?

hardening stainless steel
ATI 13-8™ alloy (UNS S13800) is a martensitic precipitation-hardening stainless steel that has excellent strength, high hardness, superior toughness, and good corrosion resistance. Good transverse toughness properties are achieved by tight chemical composition control, low carbon content, and vacuum melting.

What is grade 13 steel?

A 13% Chrome, 0.15% Carbon alloy possessing good ductility and corrosion resistance. It can be easily forged and machined. Exhibits good cold working properties. Grade 410 is the basic martensitic stainless steel; like most non-stainless steels it can be hardened by a “quench-and-temper” heat treatment.

What is 138 mo?

ARMCO PH 13-8 Mo is a martensitic precipitation hardening stainless steel. It provides a combination of excellent toughness and good transverse mechanical properties, in addition to having the highly desirable corrosion resistance and high strength of a precipitation hardening stainless steel.

What is 15 5ph stainless steel?

Stainless Steel 15-5 is a precipitation hardening martensitic stainless steel designed to have a greater toughness than 17-4 ph stainless steel. It is used in applications requiring better corrosion resistance and transverse properties compared to other similar martensitic grades.

What is H1000 condition?

The condition H1000 has higher aging temperature, which has as a consequence higher recovery of dislocations in a martensitic structure, coarsened Ni3Ti phase and smaller fraction of chi phase.

What is H1000 heat treat?

Rationale: AMS5629/H1000 is a new specification for purchase of corrosion-resistant steel product in the solution and precipitation heat treated condition.

What is stainless steel grade?

Common stainless steels The two most common stainless steel grades are 304 and 316. The key difference is the addition of molybdenum, an alloy which drastically enhances corrosion resistance, especially for more saline or chloride-exposed environments. 316 stainless steel contains molybdenum.

What is the Rockwell hardness of 17 4 stainless steel?

Grade 17-4 stainless steel is the most widely used steel of the precipitation hardening grade steels. It has high toughness, strength, and corrosion resistance….Mechanical Properties.

Properties Metric Imperial
Hardness, Brinell 352 352
Hardness, Knoop (estimated from Rockwell C) 363 363
Hardness, Rockwell C 36 36

What is 304 Condition A?

Condition A stainless steel is a variation of 304, one of the most common stainless steels in the world. Condition A is highly resistant to corrosion, making it useful in industries susceptible to this issue.

What is the most common type of stainless steel?

304 stainless steel
304 stainless steel is the most common form of stainless steel used around the world, due to its excellent corrosion resistance and value. It contains between 16 and 24 percent chromium and up to 35 percent nickel, as well as small amounts of carbon and manganese.

What is condition H1100?

Stainless Steel 17-4 H1100 is a precipitation-hardening martensitic Stainless Steel, which has corrosion resistance comparable to austenitic varieties. Our H1100 has been heat-treated to a minimum tensile strength of 140ksi, yield strength of 115ksi, an elongation in 2in of 14%, and a reduction of area of 45%.

What are the properties of stainless steel type 13-8?

13-8 – UNS S13800: Type 13-8 is a martensitic precipitation age-hardenable stainless steel. The principal features of Type 13-8 are good resistance to general and stress corrosion cracking, and high strength that is developed by a single low temperature heat treatment.

What can 13-8 Mo stainless steel be used for?

13-8 Mo is an age-hardening stainless steel with high strength and hardness along with good levels of resistance to both general corrosion and stress-corrosion cracking. PH 13-8 Mo has been used for aircraft components, nuclear reactor components, valve parts, fittings, landing gear parts, and pins.

What makes stainless steel grade 13-8 precipitation hardened?

The combination of martensitic and ferritic steels forms a fourth group of stainless steels known as precipitation-hardened steels. Stainless steel-grade 13-8 is an age hardenable, precipitation stainless steel.

Can a 13-8 PH stainless steel be hardened?

13-8 PH stainless steel can be hardened at lower temperatures than other heat-treatable types of stainless steel. It is widely used for fittings, pins, and lock washers. This material maintains its corrosion resistance in temperatures up to 1100° F.