What is the best way to paint a 6-panel door?

To paint an interior 6-panel door like a professional, you need to use a brush AND a roller. Use a 2-inch angled paintbrush on the detailed work of the panels and around the doorknob and hinges. After you brush an area of the door, however, you should take a 2-inch foam roller and roll out the paint.

What is the best paint for panel doors?

Generally, the best paint for interior doors is semi-gloss because it is easy to clean and produces a finish that lasts for a long time, but gloss is good too.

When painting a door do you start at the top or bottom?

To paint a flat door, start by painting the inside hinge edge, working around the door in one direction. Work up from the inside bottom, across the header, and down the striker side.

Is it better to paint a door with a brush or roller?

Use Brush for a Hand-Painted Finish Low-nap and foam rollers are ideal because they leave minimal stippling on the surface. But to achieve a really nice finish, use a paintbrush to lightly brush over the final coat of paint while it’s still wet to level out roller marks and leave a smooth “hand-painted” texture.

Is it possible to paint a panel door?

Obviously you could paint a panel door like this but it won’t necessarily result in a paint job you’re happy with.

What’s the best way to paint a wooden door?

To guarantee a beautifully painted panel door, it’s important to work through the following steps that involve the correct preparation for wooden doors, painting each door panel and vertical rail in the right order, ensuring that you paint in the direction of the wood grain and also using the correct brush for the area of the door you’re painting.

Is it easy to repaint an interior door?

Repainting interior doors is just as easy as painting them the first time! No need for primer or any fancy prep work, simply clean it and paint over the existing paint. One thing to note is, if you’re painting over a darker color, the first coat may be streaky. But after 1-2 more coats it should cover completely.

What’s the best way to paint a panel?

You can use a brush or a roller as long as you smooth out any drips as you go. Let the first coat dry before you apply a second coat. Tip: Remove painters tape before paint dries or slice through any dried-on painter’s tape with a utility knife while pulling it up at a 45-degree angle.