What does Indesit F08 mean?

F08 on Indesit washing machines, stands for malfunction of the heating element or temperature sensor. To the uninitiated, this decryption can only indicate that the ten or the temperature sensor has burned out and needs to be replaced. Most often this error occurs due to a closed heating element or temperature sensor.

What is F08 error?

F08 indicates that the heater is an open circuit so check the heater for continuity with a meter.

How do I fix error code F01 Indesit washing machine?

Indesit error F01

1. Turn off the washing machine and unplug the connector.
2. Wait 2 minutes and put the connector back in.
3. Wait 30 seconds and turn the washing machine back on.

What does fo5 mean on Indesit washing machine?

F05 — Waste pipe blockage or pump issue. Issue: Washing Machines door will not open / the door can be opened but water remains inside the drum. Advice: Please check for blockages in your pump filter (if applicable to model – please see user handbook).

What does it mean when all the lights are flashing on my Indesit washing machine?

End light flashing Indicates that the Indesit washing machine has reached the end of a wash programme. If the wash, rinse and spin function lights all flash at the same time, this would indicate a possible blockage in your filter or waste / drain pipe.

What does OFb mean on Whirlpool washer?

off balance
Your washer is off balance. If OFb (off balance load) appears in display, the load is out of balance. The washer was unable to remedy the off balance load via automated methods and now needs manual intervention to redistribute the load evenly around the washplate.

Can you reset an Indesit washing machine?

Indesit washing machine factory reset instructions are as follows: Switch off the power and unplug the machine. Turn on the machine using the on/off button. Turn the machine back on at the on/off button.

What does the code F08 mean on an Indesit washing machine?

If an Indesit or Hotpoint washing machine is flashing an LED 8 times, or is displaying the error code F08, this usually indicates the following. “Heater relay can’t be activated” or “heater relay stuck”.

What are the fault codes for all Indesit appliances?

Fault codes or error codes for Indesit appliances including Washing Machines, Washer Dryers, Tumble Dryers, Dishwashers, Fridges, Freezers, Cookers, Ovens, Hobs and Hoods. Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe.

What to do if you get an Indesit error code F02?

F02 Action: We recommend you check that the drain pipe and under sink plumbing for any blockages. Action: Please check that the water supply is present and of sufficient pressure, also that the tap is fully on and that the fill hose is not restricted.

Which is an example of an Indesit error code?

Fault codes or error codes for appliances including washing machines, washer dryers, cookers, dishwashers and fridges. Fault codes or error codes for Indesit appliances including Washing Machines, Washer Dryers, Tumble Dryers, Dishwashers, Fridges, Freezers, Cookers, Ovens, Hobs and Hoods.