What does CL9 mean on RAM?

2019-09-26 by No Comments

What does CL9 mean on RAM?

Race starts
CL9: Race starts – waits 9 seconds – GO! @ ‘ x’ speed.

Is CL9 faster than CL11?

Thus, the CL9 ram was 1% faster memory performance, and 2.6% faster stream performance. I should point out that the CL9 was consistently faster than CL11 on all five passes. There you have it. Not much difference, and probably nothing anybody would ever notice.

What does CL 11 mean in RAM?

Column Address Strobe
Crucial DDR3 memory offers great all-round performance running at 1600 MHz and is very affordable. Column Address Strobe (CAS) latency, or CL, is the number of clock cycles it takes before data starts to flow after a memory access command is received.

Can I use CL9 RAM with CL11?

“You will also be able to run the CL9 RAM @ CL11 if you wish. You may even be able to increase the frequency a step or two by doing so.”

Is CL9 or CL10 better?

The 1600Mhz CL10 RAM has a higher clock speed (800MHz versus 666MHz) and a lower latency (12.5 ns versus 13.5 ns), so it’s the hands down winner. So, even though CL10 is a higher divisor than CL9, the increase from 1333MHz to 1600MHz in the numerator is more than enough to compensate for that.

Can I use CL9 RAM with CL10 RAM?

Titan. In a dual channel system, you never want to mix RAM of different speeds, timing, manufacturer, voltage, etc. That is why dual channel memory is sold in MATCHED pairs. You may get lucky and it will work, but it won’t be stable.

Can I mix CL9 and CL10 memory?

In a dual channel system, you never want to mix RAM of different speeds, timing, manufacturer, voltage, etc. That is why dual channel memory is sold in MATCHED pairs. You may get lucky and it will work, but it won’t be stable.

Is CL16 better than cl18?

The CL number is how many clock cycles the RAM spends refreshing the data. At the same speed lower is better. But as speed increases so does the latency (CL). The effect on overall performance will be very small.

Is CL10 RAM good?

Can I use 2 different CL RAM?

If they work, it is fine. If they don’t go into the BIOS and set them on the same setting i.e CAS and Frequency.

What is the difference between CL9 and CL10 RAM?

Is CL18 RAM slow?

CL18 is pretty slow.

What’s the difference between CL9 and CL11 DDR3 RAM?

I’ve seen DDR3 ram labeled as CL9 or CL11. What’s the difference? How much it matters, depends on the other details too. It gets into the deep dark places of memory timings. Lower the better. CL = CAS Latency. Basically it’s the delay between when the RAM is told to do something, and when it actually happens. (super watered down version).

What does the CL mean on a RAM kit?

When buying RAM, you’ll see listings for their timings, such as CL16-18-18-38 or CL14-14-14-34 or CL 16-18-18-36. That number after the “CL” represents the RAM kit’s CAS latency, sometimes called CL. But what does CAS latency really mean? And what implications does a RAM kit’s CAS latency have for its performance?

Which is faster the CL9 or the Cl6?

The DDR3-1333 CL6 is 7.8% faster than CL9. The DDR3-1600 CL6 is only 3.2% faster than CL9. Now, to produce data most relevant to my question (the diff between 9 and 11), let’s look at just differences of 2, at the highest end of the ranges measured.

What is the CAS latency of a RAM module?

The lower the CAS latency, the better. A RAM module’s CAS (Column Address Strobe or Signal) latency is how many clock cycles in it takes for the RAM module to access a specific set of data in one of its columns (hence the name) and make that data available on its output pins, starting from when a memory controller tells it to.