What color is the remote wire for AMP?

This blue wire (typically with a white stripe), may be even more important to understand than your standard power and ground wires because if it isn’t installed correctly, your amplifier will not turn on even if it has good power and ground connections OR it may constantly draw power and drain your battery over night.

Where does the remote wire go from the amp?

The turn-on wire (also called the remote wire) is located behind the stereo. On aftermarket stereos, it’s usually a blue and white wire. The remote wire will “tell” your amplifier to turn on whenever the stereo is powered up (usually, whenever the vehicle is turned on).

How do I connect two amps to a remote wire?

You can splice the tip of the remote wire, just before you reach an amp, and tap 2 wires, one from each amp. Ive seen some people put a jumper wire from the remote terminal of one amp to the remote terminal of the 2nd amp. It works.

Is the power antenna wire the remote wire?

Hence the term “remote turn on wire”. Almost every aftermarket head unit has a remote turn on wire. Some manufacturers call it a power antenna wire. But regardless of the label all it does is output a positive 12 volts when the head unit is turned on.

Can you use any wire for remote wire?

It doesn’t matter what kind of wire you use for a remote wire. Any copper wire will work when used as a remote wire. The amplifier only turns on if the remote wire is touching the power source or if the remote wire switch is turned on. Remote wires provide 12 volts of power when turned on.

Can you split a remote wire?

I STRoNGLY advise against splitting the remote wire. True, it merely acts as a “switch” to complete the circuit for the amp, but it is crucial. Get craft with a relay, or even easier, just run the remote from a 12+ line that’s on always if the car is on but off when car is.

Can I run my remote wire to my battery?

No, run the remote wire to the remote out on the back of the headunit. You can then install a switch on the remote wire to turn it on or off, but if you run it directly to the battery you will have problems because the amps will always be on, and you will kill your battery.

What is the system remote control wire for?

The SYSTEM REMOTE CONTROL is a very low amperage OUTPUT that is used to turn on and off accessories associated with your radio, such as an external amplifier or electronic retractable antenna.

Can I use speaker wire for AMP remote wire?

Speaker wires can be used as remote wires. It doesn’t matter what kind of wire you use for a remote wire. Any copper wire will work when used as a remote wire. The amplifier only turns on if the remote wire is touching the power source or if the remote wire switch is turned on.

How do you wire a remote turn on switch?

WIRING REMOTE TURN ON TO A SWITCH Another option for providing a proper remote turn on circuit is to wire constant power and ground to a switch and then wire the output of the switch to the amplifier’s remote turn on. This way you can manually control when the amplifier turns on and off by the flip of a switch.

Which is Onan generator Remote Start switch wiring diagram?

Onan Generator Remote Start Switch Wiring Diagram – Database. Repairing electrical wiring, a lot more than some other house project is about safety. Install an outlet properly and it’s because safe as it can be; set it up improperly and it can potentially deadly.

What kind of wire do you use for a remote start switch?

When splicing wires together, constantly use approved line connectors (“wire nuts”). Outlet receptacles and switches tend to be created with push-fit wire connection slots upon the back, together with the traditional screw-terminal cable connections on the edges from the device.

Is there wiring diagram for led rocker switch?

Below you’ll find a basic on/off rocker switch wiring diagram as well as an easy to understand illuminated rocker switch wiring diagram so no matter what your needs, after reading this, you’ll want to put switches on all your LEDs by yourself. And you can because it’s so simple and you’ll find everything you need to know about it right here.