Is the Allison 1000 transmission good?

2020-04-13 by No Comments

Is the Allison 1000 transmission good?

While there’s nothing overly exceptional about an Allison 1000 transmission, the gearbox has a longstanding reputation for reliability and continuous improvement. One of the first uses of the five-speed 1000 transmission was its pairing with GM’s Duramax 6.6-liter V-8 Diesel engine.

Is the Allison 2000 a good transmission?

the 2000 series is a nice transmission, its still run in many of the newest busses. in most cases it will be limited to 5 speed, however allison can unl;ock the 6th gear if you need a taller over-drive gear…

Are all Allison 1000 transmissions the same?

no they are not the same. They have some different internal hard parts.

How many miles will Allison 1000?

Like toypuller said, on a 100% stock motor, and when properly maintained they seem to pretty much last indefinitely. If you severely overpower it, you can kill it within 100 miles if you want.

How strong is the Allison 1000?

* The Allison 1000 is rated for a 5,000-rpm input shaft speed capability. * The approximate dry weight of the transmission is 330 pounds with the PTO gear.

How can I tell if I have a Allison Transmission?

Transmission serial numbers can be found on the Transmission data plate. The serial number of an Allison transmission may be located on the transmission data plate. This can be located on the side of the transmission. This data plate is usually found on the lower rear face of the rear housing.

How much does a Allison 1000 transmission cost?

Replacement Allison 1000 Transmission Prices:

Transmission Street Smart Transmission Dealer Retail
Allison 1000 2441 4200

How much boost can a stock Duramax handle?

Simply put, it can handle plenty of abuse (40 psi of boost and high drive).

How hard is it to change LLY injectors?

It’s not very difficult. Make sure you get new seals and coppers, and make sure that the injector bore is clean before you install the new injector. All the injectors come out the easiest if you remove the line first. Use a screwdriver or similar tool to pry up on the hold down and just wiggle the injector up.

What are the advantages of the Allison 1000?

KEEPING THAT ALLISON ADVANTAGE Allison1000 and 2000 Product Familytransmissions provide many advantages for the driver who must “stop and go” or change speeds frequently. Driving is easier, safer, and more efficient. The 1000 and 2000 Product Family transmissions are rugged and designed to provide long, trouble-free service.

Is the Allison 1000 / 2000 series a metric transmission?

Allison Series 1000/2000/2400 transmissions are designed and manufactured to metric standards, and metric tools are required for service. The cooler ports and the main line pressure tap are the only non-metric fittings on the transmission case. The output flange/yoke retaining bolt is also non-metric. AUTOMATIC TRANSMISSION SERVICE GROUP

Where can I find the Allison 1000 series?

ALLISON 1000/2000 SERIES. 1. No part of any ATSG publication may be reproduced, stored in any retrieval system or transmitted in any form or by any means, including but not limited to electronic, mechanical, photocopying, recording or otherwise, without written permission of Automatic Transmission Service Group.

What’s the maximum horsepower of an Allison Transmission?

Designed for light commercial vehicles in both on-highway and public transport applications, Allison Transmission’s 1000 and 2000 Series are rated up to a maximum of 224 kW (300 hp) and have up to six speeds available, including two overdrives. Both close and wide ratio gearing are offered.