Is jet fuel a hazardous substance?

This material, if discarded as produced, is not a RCRA “listed” hazardous waste. However, conditions of use which results in chemical, physical changes or contamination, may subject it to regulation as a hazardous waste.

Is JP 8 flammable or combustible?

STABLE: Stable under normal ambient and anticipated storage and handling conditions of temperature and pressure. Flammable liquid and vapor.

What is the ASTM Standard Specification for Aviation turbine fuels?

Renewable fuels can now be blended with conventional commercial and military jet (or gas turbine) fuel through requirements in the newly issued edition of ASTM D7566-11, Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons.

Can you mix JP-8 and diesel?

You can absolutely use jp8 in your truck if you can get some. Some trucks will respond better than others though. Jp8 is a lighter key distillate mix than diesel, similar to kerosene. It has umpteen additives though.

Is JP-8 a kerosene?

The JP-8 is a kerosene which contains additives with the objective of improving its properties for military use.

Is specification for Jet A1 fuel?

Jet A-1. Jet A-1 is a kerosine grade of fuel suitable for most turbine engined aircraft. It is widely available outside the U.S.A. The main specifications for Jet A-1 grade (see below) are the UK specification DEF STAN 91-91 (Jet A-1) Nato code F-35, (formerly DERD 2494) and the ASTM specification D1655 (Jet A-1).

What is the specification for Jet A?

ExxonMobil Jet A and ExxonMobil Jet A-1 meet the requirements of ASTM D1655 Standard Specification for Aviation Turbine Fuels….Product Properties.

	Jet A	Jet A-1
Flash Point, ºC	38 Min.	38.0 Min.
Density @ 15ºC, kg/m3	775/840	775/840.0
Freeze Point, ºC	-40 Max	-47.0 Max
Viscosity @ -20ºC, mm/s	8.0 Max.	8.0000 Max.

What does UN 1263 mean for paint related material?

UN 1263: Paint related material including paint thinning, drying, removing, or reducing compound – Substance information – HazMat Tool Paint related material including paint thinning, drying, removing, or reducing compound Data from the Hazardous Materials Table Source: 49 CFR §172 (2018/07)

What are the bulk packaging requirements of UN 1197?

If the material has a flash point at or above 38 °C (100 °F) and below 93 °C (200 °F), then the bulk packaging requirements of §173.241 of this subchapter are applicable. If the material has a flash point of less than 38 °C (100 °F), then the bulk packaging requirements of §173.242 of this subchapter are applicable.

What kind of bulk container is un 1263?

Authorized specification bulk outer packagings are UN11 G fiberboard intermediate bulk containers (IBC) and UN13 H4 woven plastic, coated and with liner flexible intermediate bulk containers (FIBCs) meeting the Packing Group II performance level and lined with a plastic liner of at least 6 mil thickness. d.

What is the vapor pressure limit for UN 3082?

Additional Requirement: Only liquids with a vapor pressure less than or equal to 110 kPa at 50 [deg]C (1.1 bar at 122 [deg]F), or 130 kPa at 55 [deg]C (1.3 bar at 131 [deg]F) are authorized, except for UN2672 (also see Special Provision IP8 for UN2672 ).