How do you take apart a Paperpro stapler?

Most of our staplers load using the simple, four-step process below.

1. Flip. Flip the stapler upside down and open the base away from the body.
2. Pull. Pull the magazine pusher back to expose the staple channel.
3. Drop. Drop the staples into the magazine channel with the points facing up.
4. Push.

How do you get a staples out of a jammed stapler?

A paper clip is the perfect size for picking at a jammed stapler. The method is the same as above, using the loop of the paperclip to try to loosen the jammed staple up so it falls out of the magazine. You can also try to pick out the jammed staple with the point of the paperclip, gliding it out.

How do you unjam a heavy duty stapler?

How to Fix a Jammed Heavy-Duty Stapler

1. Firmly grab the handle of the heavy-duty stapler.
2. Pull out the remaining good staple clip and set it aside.
3. Grab the jammed staple with the needle-nosed pliers and pull it out.
4. Insert the solid clip of staples back into the head of the stapler.

How do you put staples in a tiny stapler?

Insert the strip of staples, points down, into the staple channel and close the top of the stapler, the magazine will slide back into its correct position and you’ll hear a small click.

How do you fix a Bostitch stapler?

Warning

1. Disconnect the construction stapler from the air supply. Use a hammer and punch to do this.
2. Push the driver upwards and past the jammed staple. Do this by putting the punch at the tip of the driver, which you should see coming out of the nose.
3. Tap the hammer against the punch and the jam should clear.

How do I adjust my stapler?

Open the stapler. Hold the base of the stapler firmly in one hand, then pull back the top of the stapler where the staple tray is. Other stapler models include a silver tab on the bottom of the stapler, toward the back. Press it, and the stapler will automatically pop open, enabling you to use it for tacking purposes.

How do you put staples in a staple gun?

Place the staples upside-down in the magazine. Insert a row of staples into the compartment with the legs facing up toward you, and slide them toward the front of the stapler. Keep holding the gun upside down to keep them in place.

How many staples can a stapler hold?

The full size stapler has a full strip magazine to hold 210 staples – which is the exact number of staples that comes in a standard staple strip.

How do you fix a stapler spring?

First pull out the spring assembly. Use a pair of needle-nosed pliers to pull the jammed staples out of the head of the stapler. In a worst-case scenario, it could help to drop the stapler on a solid surface a few times to loosen up the staples.