How do you change the 4 digit code on a Schlage Lock?

Press the “Schlage” button and the number “1” button simultaneously to add/change a new entry code. and flash three times. Enter a new four-digit code, and wait for the “Schlage” button to flash and beep three times. Re-enter the same four-digit code to confirm the change.

Does Schlage make a Rekeyable lock?

Schlage introduced the new SecureKey rekeyable lock system in January. Schlage literature states that the lock is bump and pick resistant and meets UL 437, section 11.6 standards. This is certainly understandable since there are no traditional drivers and no normal shearline to bypass by bumping.

How do you reprogram a Schlage lock without the code?

How To Reset Schlage Keypad Lock Without Programming Code

1. Disconnect the batteries.
2. Press and hold the Outside Schlage Button.
3. While holding the Outside Schlage Button, Reconnect the batteries.
4. Release the Outside Schlage Button.

How do you change the 4 digit code on a Schlage lock without coding?

Pushing the Shlage button and the “1” key primes the lock to accept a new entry code. To add a new entry code, press the “Schlage” button and the number “1” button simultaneously to add a new entry code. Wait for the “Schlage” button to beep and flash three times.

Can a Schlage door knob be rekeyed?

Schlage Rekeying Kits provide everything you need to get the job done—including all the tools and parts you need for repinning the cylinders of most Schlage locksets so that they work with a single key.

How do I get my locks keyed the same?

To get your locks re-keyed, visit your local locksmith to have them do it for you. Or, just ask the store you’re purchasing the locks from to re-key the lock to one you may already own. It’s a process that should only take a few minutes.

What is better Schlage or Kwikset?

Conclusion. Between Schlage and Kwikset, there is absolutely no doubt that Schlage makes better locks. With a better, more precise manufacturing process and 2 additional security pins than the Kwikset deadbolt, Schlage locks are significantly harder to pick, bump or compromise in non-destructive ways.

Can all Schlage locks be rekeyed?

Please note, products are not keyed alike across functions. Schlage Rekeying Kits provide everything you need to get the job done—including all the tools and parts you need for repinning the cylinders of most Schlage locksets so that they work with a single key.

Where is the 6 digit code on Schlage lock?

On the keypad side, or exterior side of the door, you will find a sticker that includes the serial number, six-digit programming code and two pre-programmed four-digit user codes. You must remove the keypad from the door to see the sticker.

How do I rekey a Schlage Lock?

How to Rekey a Schlage Door Knob or Lever. Disassemble Lock. Insert key into knob or lever cylinder plug, rotate 90-degrees. Depress knob/lever catch using tab on key gauge and pull knob/lever off of knob catch. Use your thumb and forefinger to apply pressure on the rose and pull knob/lever off spindle.

How do you reset a Schlage Lock?

Press and hold the “Schlage” button for at least 5 seconds. Once complete, the Schlage door lock will be completely reset to the original factory settings.

Does Schlage have smart key?

Schlage smart key has five sliders and a sidebar that protect your door from key bumping of even lock picking. For it to work, the sliders must be aligned appropriately so that the single side-bar can retract easily. Users can rekey this SmartKey without needing any special skills or disassembling the entire unit.

What is a lock re-key?

A rekey is the process of changing a lock so a different key may operate it. The rekey process was invented in 1836 by an man from New Jersey named Solomon Andrews . It’s a procedure that involves changing the tumbler configuration of the lock that allows a new key to function while the old one will not.