How do I fix a paper jam Lexmark?

The paper jam is located either at the Front door or in Tray 1.

1. Pull Tray 1 out or open the affected paper tray (could be any input source).
2. Firmly grasp the jammed paper and gently pull it out.
3. Remove all the paper/print media from all the trays.
4. Push Tray 1 or the affected paper tray back in.

Why does my Lexmark printer keep jamming?

An input sensor that is damaged or sticking due to contamination (typically causes a 200 Paper Jam message). A damaged surface on the bottom of the toner cartridge, causing the paper to catch on it (can cause a 200 or a 201 Paper Jam message). NOTE: Replacing the cartridge should correct this issue.

How do you get a bad paper jam out?

Cause and Solution

1. Slowly pull the paper out, either from the Rear Tray or from the Paper Output Slot, whichever is easier.
2. Open the Rear Cover.
3. Pull the paper out slowly.
4. Close the Rear Cover.
5. Reload the paper, and press the RESUME/CANCEL button on the printer.

How do I clear error messages on my Lexmark printer?

To clear the message, turn the printer off, reinstall the paper tray, and turn the printer on. If the error message continues, call for service. Note: This error only occurs when calibration mode is ON.

Why does my HP printer keep saying paper jam?

Dust, paper fiber, and other debris might accumulate on the paper feed rollers and cause paper jams and paper feed issues. Clean the rollers inside the printer, and then try to print again. Turn off the printer, and then disconnect the power cord.

Why does my printer keep saying paper jam?

Why is my Lexmark printer not working?

One of the most common Lexmark printer issues is that the printer is not responding to print requests. Restart your printer. In some cases, a simple restart can fix the issue. Unplug the printer and check if there is any paper stuck in the machine, and if the toner is installed correctly.

Why is my Lexmark not printing?

What to do if your Lexmark printer jams?

If it is not completely closed, it can cause the paper to jam. Once the entire paper path is clear, press the select () button or the Continue button to continue printing. If the printer still displays a ” 202.x3 or 202.x6 ” type paper jam message, power it off. Wait for 30 seconds, and then power the printer back on.

Where are the rollers on a Lexmark printer?

The rollers are located in the area of the printer highlighted by the yellow circles. If the paper is getting past the front of the printer and jamming elsewhere with a 241 Paper Jam error, do the following:

What does it mean when Lexmark says 202.x6?

x3 or 202.x6 error means that the T65x or an X65xe Series Printer is experiencing a ‘warm up’ jam. A sheet of paper or other print media improperly cleared from a previous jam is usually the cause. Once the paper path is completely cleared of all jammed paper/media, the printer should resume normal printing. Clearing the paper jam

What is the print speed of Lexmark t652dn?

The Lexmark T652dn delivers high-endurance printing to busy workgroups, offering generous standard input of up to 650 sheets and rapid print speeds up to 50 ppm. From network security to user-access restrictions, you’ll be fully equipped to keep valuable data safe and sound.