How do I connect my parrot bebop to my controller?

Manually connecting Parrot Skycontroller using a smartphone

1. Use your smartphone to search for available WiFi networks:
2. Then select the “Skycontroller _XXXX” network.
3. Click on Manage Wi-Fi.
4. Select the drone to connect > A pop-up window gives you the option to connect Parrot Bebop.

How far does the parrot bebop fly?

1.24 miles
With the remote control the drone can be flown up to 1.24 miles away. Longer flight time: The new quadcopter gets 30 minutes of flight time per battery and up to 60 minutes with the two included high-capacity batteries!

How do I charge my bebop 2 controller?

How to Charge the Parrot SkyController 2

1. Connect the remote control to the charger and the charger to a power outlet.
2. The battery charge indicator light will turn orange while battery is charging then green when it’s fully charged.

How do I calibrate my parrot bebop 2?

How To Reset Parrot Bebop 2 Flat Screen

1. With the Parrot FreeFlight Pro connected, click on your Bebop 2 from the main screen in the app.
2. Click on ‘Flat Trim’
3. Next, place the Parrot Bebop 2 on a very flat piece of ground.
4. Click on ‘Calibrate’
5. Next, you should see some slight movement on screen as the Flat Screen calibrates.

How far can the parrot bebop 2 fly?

1.2 miles
The black Skycontroller from Parrot extends the BeBop Drone 2’s Wi-Fi range up to 1.2 miles and features a hardware-based control pad.

How do I reset my parrot Anafi controller?

Here is the ANAFI reset procedure.

1. Power ANAFI on.
2. Press the power button and keep it pressed: after approximately 8 seconds, the smart battery’s LEDs turn red, one after the other.
3. When the four LEDs are red, release the power button.

How do I reset my parrot Sky Remote?

To reset your drone, switch it on and wait for the light to stop flashing. Then, hold the ON/OFF button down for 10 seconds. After doing this, the BEBOP 2’s light will flash and the drone will restart.