Can HP LaserJet m1536dnf MFP scan?

Tackle daily business tasks with a cost-effective, fast HP LaserJet MFP. Print two-sided documents from anywhere, using HP ePrinth1 . Streamline your workflow by copying, scanning, faxing and connecting securely via Ethernet networking.

Is HP LaserJet 1536dnf MFP color?

What do I need to make it print in color, or was the packaging misleading, and it only prints in b&w? According to the specification sheet the LaserJet 1536dnf printer is a monochrome device.

How do I connect my HP LaserJet 1536dnf MFP wireless?

Connect the computer or mobile device to the internet

1. Press the ePrint button on the printer’s control panel.
2. Accept the terms and conditions for use.
3. To enable the web services, follow the on-screen instructions to setup on 123.hp.com/setup.
4. Print a test page.

How do I set up scan to email on my HP printer?

In the Printer Settings area, click Additional Settings, and then click Open Embedded Web Server. In the Scan Settings area, click Scan to Email, and then click Begin Scan to Email Setup.

How do I change the ink on my HP Laserjet 1536dnf MFP?

Hot water sets toner into the fabric.

1. Open the print cartridge door, and then remove the old print cartridge.
2. Remove the new print cartridge from the bag.
3. Pull the tab and completely remove the tape from the print cartridge.
4. Gently rock the print cartridge from front to back to distribute the toner evenly.

Why does my laser printer leave streaks?

Streaking is usually caused by a worn out drum unit or spent toner cartridge. Remove the cartridge and rock it back and forth a few times over a trashcan to evenly redistribute the toner powder. Some toner powder may emit from the cartridge as you do this. Reinstall the toner cartridge and run a test print.

Why is my laser printer smearing?

Smears that appear in addition to otherwise well-formed output may signal toner contamination inside your LaserJet, either from a leaky cartridge or from improperly fused sheets that leave toner residue behind. Smears at the edge of the sheet that enters the printer first point to dirty paper guides.