What is FSV in forklift?
What is FSV in forklift?
Free Lift is a forklift’s ability to raise a load to the top of the first stage. Without free lift, the entire stage has to move up together while the forks and load stay at the bottom of the first stage. Many forklifts without free lift are used for outside applications where clearance and racking are not a concern.
Where is the mast number on a Toyota forklift?
The Mast Number or Mast Serial Number should be stamped on the outside of the driver’s side mast channel.
What is Mast type in forklift?
The forklift’s mast, or upright, is the portion of the forklift that lifts, lowers, and positions the loads manipulated by the forks. Each type of mast presents its own set of advantages for different applications depending on their height and stacking requirements.
What is the height of a forklift mast?
A typical two stage mast for a forklift with a capacity from 2,000 lbs. to 6,000 lbs. will have approximately 130″ of maximum lift and will be around 83-88″ Overall Height Lowered (OAHL). Two stage masts are very common in high capacity forklifts of 15,000 lbs. and up.
What is a 3 stage mast on a forklift?
3-Stage – A three stage mast, or triplex, is the most versatile forklift mast and also the most popular. The outer rails allow for free lift, and the two inner sections can lift loads higher than a two stage. This mast type is a good choice for general warehouse applications.
What is the rated capacity of a forklift?
A forklift’s rated load capacity is the maximum weight in kilograms that a forklift can safely lift and transport at a specified load centre distance in millimetres. This rated load capacity is listed on the forklifts name plate or load capacity data plate.
Are forklift masts interchangeable?
Flash forward to today, and no one really exchanges masts between forklifts any longer. It can be done but it rarely is done. Dealers have large inventories, models of forklifts have some design differences that eliminate even the option of swapping forklift masts, and labor costs are high to swap the masts.
What is a 2 stage mast?
2-Stage – A two stage mast, also known as a duplex, has two sections. The outer stage does not move and gives the option for freelift. The inner mast section raises up to elevate the carriage and forks. A two stage mast offers great visibility and is ideal for moving loads in trailers.
What are the 3 common mast types?
There are three common types: Single Stage (simplex mast) 2-Stage (duplex mast) 3-Stage (triplex mast)
What is a 3-stage mast on a forklift?
What is free lift on a forklift?
A forklift’s free lift is the maximum height you can raise the forks without changing the mast height. There are two instances where this typically happens: when the inner mast rails extend past the outer mast rails or when the load backrest or carriage exceeds the height of the outer mast rails.
How tall does a FSV forklift mast need to be?
(Afterwards, we explain Stages and Free Lift.) Toyota FSV Masts are 3 Stage Masts with Free Lift. It’s the most popular type of mast we sell. 131.5” Maximum Fork Height is the most popular size. An FV Mast is 2 Stages with Free Lift. They’re second most popular behind FSV for applications that don’t need quite as much height.
What kind of mast does a Toyota forklift use?
The chain raises the carriage at a rate of two inches for every inch of cylinder rod extension. The duplex upright is a two-stage assembly with full free lift. This upright resembles the standard upright and works in the same way, except a primary, center-mounted cylinder provides full free lift.
How does a free lift forklift mast work?
Free lift effectively adds a stage level of height to a forklift’s ability to lift and uses a hydraulic cylinder at the center of the mast. Without free lift, a load is always at the bottom of the first stage. To raise any load, the entire stage has to lift. This often times creates clearance issues.
How tall is a triple stage forklift mast?
Typical lift height for a triple stage mast for a forklift with base capacity from 2,000 lbs. to 6,000 lbs. will have 189″ of maximum lift and will be around 83-88″ OAHL. Recommended Uses: To load and unload higher than simplex or duplex or when full free lift is needed and duplex masts are not available.