What is BIOS setup utility used for?

The BIOS Setup utility reports system information and can be used to configure the server BIOS settings. BIOS has a Setup utility stored in the BIOS flash memory. The configured data is provided with context-sensitive Help and is stored in the system’s battery-backed CMOS RAM.

What is HP BIOS configuration utility?

HP BIOS Configuration Utility (BCU) is a free utility that enables you to do the following: ● Read available BIOS settings and their values from a supported desktop, workstation, or notebook. computer.

When should you use the BIOS setup?

BIOS instructs the computer on how to perform basic functions such as booting and keyboard control. BIOS is also used to identify and configure the hardware in a computer such as the hard drive, floppy drive, optical drive, CPU, memory, and related equipment.

How do I check BIOS settings?

Finding the BIOS Version on Windows Computers Using the BIOS Menu

1. Restart the computer.
2. Open the BIOS menu. As the computer reboots, press F2, F10, F12, or Del to enter the computer BIOS menu.
3. Find the BIOS version. In the BIOS menu, look for BIOS Revision, BIOS Version, or Firmware Version.

How do you set BIOS on HP laptop?

Press and hold the “F10” key as soon as the boot process begins. If the Windows loading screen appears, allow your system to finish booting and restart again. Release the “F10” key as soon as the BIOS menu screen appears. Use the on-screen instructions on the HP laptop BIOS menu screen to navigate,…

How do access BIOS hp?

How to Get to BIOS on HP Press Windows + I to open Windows Settings. Select Update & Security. Shift to Recovery in the left sidebar. Click on the Restart now button under Advanced startup.

How do you get to BIOS settings?

You can easily access to BIOS setup on your laptop in following steps instead of using the traditional F1 button. Boot into Windows. Choose Settings at the bottom and when the next set of options shows up choose Change PC settings. On the left, at the bottom choose Update and Recovery, then on the screen that comes up, choose Recovery at the bottom.

What is the BIOS setup needed for?

There are four main function of Computer’s BIOS and those are: POST – Test the computer hardware and make sure no errors exist before loading the operating system. BOOSTRAP LOADER – Locate the operating system .If a capable operating system is located the BIOS will pass control to it. BIOS Driver – Low level drivers that give the bios basic operational control over your computer.