How do you reset maintenance kit?
How do you reset maintenance kit?
To Reset or clear the maintenance kit count via Control Panel:
- Turn the printer off…
- Turn the printer on.
- When you see the memory count begin, Press and hold OK button until all LED lights remain lit.
- Release OK button.
How do I reset my HP LaserJet 9040dn?
Turn the printer on. When you see the memory count begin, Press and hold the 6 key. When all three LED lights remain lit, release the 6 key. Press the 9 key three times until COLD RESET is displayed in the control panel.
How do I remove the tray 4 from my HP 9050?
Carefully remove Tray 4 as shown in the diagram below.
- To gain access to the separation roller, slide the blue roller shield away from the roller toward the back of the printer, as shown below.
- Pinch the tab on the end of each roller and slide the rollers off the shaft.
- Use both hands to reinstall Tray 4.
What is maintenance kit low?
If the display panel on your HP LaserJet reads “Perform Printer Maintenance”, “Perform User Maintenance”, “Maintenance Kit Low”, “Maintenance Kit Very Low”, or anything along those lines it means your printer needs a preventative maintenance kit, which includes a fuser and various rollers.
How do you reset the maintenance light on a HP LaserJet 9050?
HP LaserJet 9000 , 9040 , 9050 Reset the maintenance count
- Turn the printer off.
- Press and hold the checkmark (Select) button.
- Turn the printer on while still holding the checkmark (Select) button.
- Continue to hold the checkmark button down until all three control panel lights (LEDs) illuminate, and then release it.
How do I reset my HP 9050 printer?
To Perform a Cold Reset via Control Panel:
- Turn the printer off…
- Turn the printer on.
- When you see the memory count begin, Press and hold the 6 key.
- When all three LED lights remain lit, release the 6 key.
- Press the 9 key three times until COLD RESET is displayed in the control panel.
What does a maintenance kit do in a printer?
A maintenance kit is a set of replacement parts for a printer. Each printer has a preset maintenance interval, which occurs after a certain amount of pages are printed. The maintenance interval lets the user know that it’s time to install the maintenance kit so that the parts within the printer do not get overused.
What is a maintenance kit?
How do you know if a printer needs routine maintenance?
How do you know if a printer needs routine maintenance? If a user complains that a printer is not printing, the problem always lies with the printer itself. If loose toner comes out with your printout, the fuser is not reaching the proper temperature and professional service is required.
How to install the HP 9000 9040 9050 fuser maintenance kit?
Reinstall duplexer if needed and close door Resetting Maintenance Count 1. Hold down the CHECK button while powering on the printer 2. Keep button depressed until all 3 lights are on 3. Use UP arrow or Down arrow key to scroll to “NEW MAINTENANCE KIT” 4. Press the CHECK button to select 5.
Is there a way to reset the maintenance kit?
Perform this procedure only after a maintenance kit has been installed. Do not use this procedure to temporarily clear the Replace Maintenance Kit message. At the product control panel, press the Home button. Select the Yes option to reset the maintenance-kit counter. Loading… Loading… Loading…
How to reset the maintenance kit on a HP LaserJet?
Reset the maintenance-kit counter 1 At the product control panel, press the Home button. 2 Open the following menus: Administration Manage Supplies Reset Supplies New Maintenance Kit 3 Select the Yes option to reset the maintenance-kit counter.
How often do I need to replace my hp MFP maintenance kit?
The printer maintenance kit is a consumable and is not covered under warranty. To ensure optimum print quality, HP recommends that a new printer maintenance kit be installed approximately every 350,000 pages. Depending on how you use the MFP, you might need to replace the kit more often.