How do I install my Samsung ice maker water line?

To install the water line, follow these steps:

1. 1 Shut off the main water supply and turn the icemaker off.
2. 2 Locate the nearest cold drinking water line.
3. 3 Connect to the 3/16″ white plastic tube on the back of the refrigerator.
4. 4 Slip the compression nut onto the white plastic tube.

What size is Samsung refrigerator water line?

We recommend using a water line installation kit that uses 1/4 inch copper tubing, a 1/4 inch compression nut, and a ferrule.

What size water line goes to a refrigerator ice maker?

1/4-inch
The tubing should have a diameter of 1/4-inch and can be copper line, braided steel line or plastic tubing. Many professionals prefer copper line, but plastic tubing is commonly sold as part of ice maker installation kits.

Do you need a water line for an ice maker?

A water line allows you to make ice in your refrigerator. Refrigerators that feature built-in water dispensers or automatic ice makers need to be connected to a water source. Fridges without ice makers or water dispensers don’t need any type of water source to function properly.

Why is my Samsung ice maker not working?

If the ice maker appears to not be making any or enough ice, low water pressure or a faulty water filter may be to blame. When the ice maker makes small, cloudy, or clumped ice, it could be something as simple as a dirty water filter, low water pressure, or high mineral deposits in your water.

Why is my Samsung refrigerator water dispenser not working?

Common solutions for: My Samsung Refrigerator Water Dispenser Is Not Working. If the water inlet valve is defective, or if the water pressure is too low, the water valve will not open. The valve requires at least 20psi to function properly. Make sure that the water pressure to the valve is at least 20 psi.

How do you hook up an ice maker water line?

Unscrew the connector using locking pliers and purchase a cap or plug that will fit it. It’s easy to install the cap — just screw it on. Once it’s tight, turn on the water to make sure it doesn’t leak, then turn the water off again, and you’re ready to plug in the refrigerator and push it back against the wall.

How does the ice maker on a Samsung refrigerator work?

Ice dispensing bucket assembly. Filling up your glass with ice at the press of a button satisfies anyone with a parched pallet. Samsung refrigerators consistently score high for user satisfaction according to Consumer Reports.

How do I seal gaps in my Samsung ice maker?

1. Seal the ice room Gaps may exist between the Ice Room housing and liner wall. Use the RTV sealant supplied from Samsung to seal these gaps. Part number required: DA81-05595A Cut the applicator tip at a 45 degree angle, and then apply the sealant along the joints identified by the red line. This will help to provide a sealed ice room environment.

What should the freezer temperature be on a Samsung refrigerator?

Samsung Refrigerator Ice Maker Assembly. Refrigerator ice maker assembly. If your icemaker is not working, make sure that the freezer’s temperature is around zero degrees Fahrenheit. The freezer temperature should be set between 0 and 5 degrees Fahrenheit (-18 to -15C) for the ice maker to work properly.

What should I do if my Samsung ice maker is not working?

Replacement Samsung icemaker assembly. Plastic tray style icemaker. Refrigerator ice maker assembly. Nine cube ice tray.If the icemaker is not working make sure the freezer temperature is around zero degrees Fahrenheit.If so, the icemaker or water valve could be defective. Ice Bucket Assembly.