How do I change the IP address on my HP ProCurve switch?

HP Procurve Switch # [Tab] to the IP Config (DHCP/Bootp) field and use the Space bar to select the Manual option. [Tab] to the IP Address field and enter the IP address that is compatible with your network. [Tab] to the Subnet Mask field and enter the subnet mask used for your network.

How do I log into my HP ProCurve switch?

Log into your ProCurve using SSH or Telnet. Select Run Setup in the menu either by hitting 8 or using the arrow keys then hitting enter. Using the arrow keys, select Logon Default. Hit space to change Logon Default to CLI.

How do I find the IP address of my HP switch?

A switch should have a web interface and a telnet interface. Another approach would be to use the arp command to find its IP address from the Mac address (which should be physically labeled on it somewhere).

How do I reset my HP Deskjet 2620 to factory settings?

2620-24-PPoE+: factory default reset on the switch

1. Using pointed objects, simultaneously press both the Reset and Clear. buttons on the front of the switch.
2. Continue to press the Clear button while releasing the Reset button.
3. When the Self Test LED begins to flash, release the Clear button.

What is the default username and password for HP switch?

The default username for first time configuration is admin, no password is required. Usernames and passwords are case sensitive.

How do I wipe my HP switch?

Solution:

1. Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch. The power and fault lights come on.
2. Continue to press the Clear button while releasing the Reset button.
3. When the Self Test LED begins to blink, release the Clear button.

How do I reset my HP DeskJet 2620 wireless?

Reset Wi-Fi Settings HP DeskJet 2620

1. Press simultaneusly both Cancel an WiFi Buttons.
2. Keep it pressed until HP DeskJet 2620 Wi-Fi Led starts blinking.
3. You can release both keys now.
4. Very Nice! HP DeskJet 2620 Wi-fi password is deleted and can be set up once again.

What’s the default IP address for HP ProCurve 2650?

“Note: After completing this procedure, there will be no password, the IP address will be returned to the default 192.168.2.10, and all configuration settings will be returned to factory defaults.” Was this post helpful? Thanks for your feedback!

What kind of switch is in the HP 2620?

The HP 2620 Switch Series consists of five switches with 10/100 connectivity. The HP 2620-24 Switch is a fanless switch with quiet. operation, making it ideal for deployments in open spaces. The HP 2620-24-PPoE+ Switch, HP 2620-24-PoE+ Switch, and HP 2620-48-.

Where to find IP address for HP DeskJet 2620?

Click the “Kudos/Thumbs Up” on the bottom right to say “Thanks” for helping! 10-21-2019 01:24 PM 10-22-2019 11:33 AM @ahmeeed, Welcome to the HP Support Community! To assist you better, kindly describe the issue you are facing with the printer. The IP Address of the printer can be found on the Network configuration page.

How to reset password on ProCurve switch 2610-48 PWR?

Thanks for your feedback! short port1 and port2 by using straight cable and switch on the procurve switch for 40 seconds atleast also disconnects all the cables from the other ports before doing this. Then it will set as a factory defaults. Was this post helpful?