Does block paving need maintenance?

Surprisingly, also yes. That’s because block paving is naturally low maintenance, meaning all you need are a few specialist cleaning methods under your belt to remove even the most stubborn stains.

How do you maintain a monoblock driveway?

HOW DO I CLEAN BLOCK PAVING?

1. A good clean with a broom and strong detergent.
2. Apply a weed preventative between joints of your block paving.
3. If using a power washer, it should be angled at 30°and sprayed diagonally on a medium pressure.
4. Make sure all cleaning product has been rinsed away.

How do you maintain block paving?

Block Paving Cleaning and Maintenance

1. Pull out, scrape off any weeds and moss.
2. Using soapy water (basic washing-up liquid or a non-acid based detergent will suffice) and a stiff bristled yard brush, scrub the paving surfaces and hose down with clean water.

Is block paving good for driveways?

Block Paving Enhances Your Property Because block paved driveways are aesthetically pleasing, extremely durable, and reliable. They are also easily repaired which is an added advantage, because a damaged block can be simply replaced with a good one.

What is the best driveway cleaner?

For really tough stains, use a stiff bristle brush before blasting with the washer.

• 1) Zep Driveway and Concrete Cleaner.
• 2) Krud Kutter Concrete and Driveway Cleaner.
• 3) Simple Green 18202 Concrete and Driveway Cleaner.
• 4) ACT Microbial Concrete Cleaner.
• 5) Terminator-HSD.
• 6) Oil Eater Cleaner Degreaser.

Is it cheaper to block pave or tarmac?

There are usually less upfront costs. The materials for tarmac are often cheaper, and the labour costs will be lower because tarmac takes less time to lay. That said, block paving only costs 10% more on average.

What is the best paving for a driveway?

For a more modern look for your driveway, Bradstone’s Stonemaster® Block Paving is a superbly realistic alternative to natural granite. Available in three different shades of grey, with each colour available in either a 300x100mm single size or a mixed size pack containing four different sized pavers.

Is it bad to pressure wash your driveway?

The quick answer is yes, power washing can degrade a concrete surface. You can notice visible damage from water pressure at the level at which even light-duty power washers can operate. Therefore, if you aren’t careful, you can cause irreversible damage to your driveway or patio.

Should you seal your driveway after pressure washing?

One way to keep your concrete driveway, walkway or walls looking good is to wash them and seal them every 2 to 3 years. Sealer also helps prevent stains from setting in on the concrete. Sealing concrete after pressure washing is similar to painting walls in your house.

Can a monoblock driveway work with a garden?

You could have a grassy front to your house and park your cars on the street. As a professional paving contractor, we can come to your home to see if a new monoblock driveway would work with your garden layout and if so give you a free quote to install a new driveway.

How does proteks work on mono block driveways?

The Proteks System is a breathable membrane that allows the blocks to breathe naturally and will allow water to dissipate. The application of The Proteks Resin Seal will leave the drive way maintenance free. Once treated you can pressure wash as often as you like safe in the knowledge you will never need to sand again.

What kind of cleaner to use on block paving?

Older paving will usually need a strong effective cleaner to make it look good again. Consider using an acid based cleaner to clean block paving if your colour has faded from the block paving surface. An acid based cleaner for block paving works by stripping off the top layer of the concrete,.

Is there such thing as maintenance free paving?

Those glib salesbods that promise “maintenance-free” paving of one form or another are clowns. Maintenance keeps paving in prime condition: lack of maintenance allows paving to deteriorate.