Are Fiocchi and Cheddite hulls interchangeable?

They are not much different but generally speaking, it looks like pressures in Cheddite hulls are slightly higher than the same components in a Fiocchi hull. You could probably interchange data on a light lower pressure load but not in a max pressure load.

What brands use Cheddite hulls?

RC, Eley, Hull, Saga, Clever, Diana, Gamebore, Fiocchi.

What hulls are reloadable?

Use Good Hulls Winchester AA and Remington STS hulls are the two most common, highest-quality hulls for reloading available today. They have brass heads and durable plastic cases that last for quite a few reloads. You can either buy factory loads and save the hulls or purchase empties from gun clubs or online.

Are Cheddite hulls straight or tapered?

AA hulls, (The current ones, known as High Strength cases), are in fact straight walled, BUT, due to their very deep, and cupped base wad, the area where the powder sits is also smaller, and very similar to that same area in a tapered wall hull. Therefore those cases also use wads designed for tapered wall cases also.

Are Rio and Cheddite hulls the same?

They are the same. There have been a couple threads on this and the fact that new Rio hulls over the past year or so are head-stamped with the traditional Cheddite “12” and stars.

Are Rio and Cheddite the same?

Are federal and Cheddite hulls the same?

Cheddite primers are slightly larger in diameter than are the Federal, and every other American made primer. That means a loose fit in the primer pocket, possible gas leakage and possibly a loose primer falling into the action, after firing if you used an American primer and did not tighten the primer pocket.

What are the best shotgun hulls to reload?

The general rule is premium hulls are the best. That being Remington STS ( which is the most preferred hull for loading ,the the Win. AA and the Federal premium hulls. You can reload others but you will just have to find out what works for you .

How many times can you reload a shotshell?

Generally speaking, paper hulls can be reloaded twice with target type reloads before they ‘pin hole’. Plastic hulls can go from a couple of times, sometimes, but not always, to as many as five or six before they get both dirty and ragged looking.

Are Cheddite hulls straight wall?

Cheddite produces high quality hulls of all gauges and lengths for manufacturing clients all over the world. They produce well over a billion hulls every year. These are reliable straight-wall hulls; extremely versatile for almost all load types. Contains a Cheddite 209 primer (Cheddite CX2000).

What kind of hulls does a Cheddite have?

New and unprimed Cheddite hulls. Don’t worry, we have a huge stock of primers on hand! 16 mm b Once-fired hulls, very clean. Marked Challenger, but these are Cheddite hulls. 100/bag

Are there 410 Cheddite hulls in prairiewind decoys?

These are true .410 hulls according to SAAMI specifications. The maximum body diameter, which is slightly wider than CIP European standards, They are stamped .410 on the head. If cartridge manufacturers do not produce their own hulls, it is highly likely that they are using Cheddite hulls.

What does Cheddite mean in shooting shotshells?

Shooting Shotshells – Cheddite Cheddite has put its name to a complete line of cartridges that have been adapted for the discipline and that have been carefully designed down to the smallest detail to obtain consistency and to maximize ballistic performance.

Who are the largest manufacturers of hulls in the world?

Cheddite’s business is to provide components to the world; they are the largest supplier of hulls (maybe primers, too) in Europe. Most of the manufacturers across the pond have some cooperative arrangement for some components between companies. Most buy hulls from Cheddite.